Turning Ideas Into Reality

IC's for the Internet of things - Stand Alone UART ICs

Stand alone UART's are the heart of what has been called ďThe internet of things.Ē These chips are serial input and output ICís allow you to connect your devices remotely using standard interfaces such as RS-232, RS-485, USB, and Ethernet. With these ICís, you can connect logic, relays, switches, optocouplers, and other devices to standard digital interfaces. No external parts are required. They support standard supply voltages from 2.5 to 5.25 volts with low power consumption of 5 mA typical. Inputs and outputs are TTL/CMOS compatible. Parts are ROHS compliant, and low EMI. All parts are in full production, and there is no minimum order.

SI14 Serial Input 14 bits

Stand alone UART IC serial input of 14 bits, the chip transmits when inputs change, or after a delay of 100 or 1000mS. 20 pin IC.

SO14 Serial Output 14 bits

Stand alone UART IC serial output of 14 bits. 20 pin IC.

SIO7 Serial Output 7 Bits, Serial Input 7 Bits

Stand alone UART IC serial input of 7 bits, the chip transmits when inputs change, or after a delay of 100 mS. Serial output of 7 bits. 20 pin IC.

SIO8 Serial Output 8 Bits, Serial Input 8 Bits

Stand alone UART IC serial input of 8 bits, the chip can be configured to transmit when inputs change, after a byte is received or after a delay of 100 or 1000 mS. Serial output of 8 bits. 28 pin IC.

SAIO7 7 bits input, 7 bits output, addressable and expandable.

Stand alone UART IC serial input of 7 bits and 7 bits of output, expandable to 112 bits. 28 pin IC.

SIO885

Stand alone UART IC 8 analog inputs connected to a 8 bit A/D converter, 8 bits of digital input, and 5 bits of digital output. 28 pin IC. Email us for spec sheet.

Custom IC's

Close but not quite? Since our products are software based, we can modify existing parts to fit your needs at a minimal cost or create new parts designed to your specifications. Email us and we can make a chip for you!